High carbonization rate Hard Wood Carbonizing Furnace (Destructive Distillation)

1.Easy operate&maintain 2.High carbonization rate 3.no smoking, little pollution 4.one people can operate 3-5 sets 5.

INTRODUCTION:

1,The whole gas flow type include the outer stove, three set of inner stoves , and the 3ton hoisting tools. 

2,When one inner stove have been finished carbonization, we will use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, we can put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot, it is the ideal choice for mass production of charcoal.

FEATURES:

1,Easy operate and maintain, higher safety, energy saving                                                       

2,High carbonization rate, no smoking, little pollution,

3,Newly developed carbonization stove, which can dry the materials with the superfluous energy produced in the process of carbonization. 6-8 hours per stove and can work continuously                                                              

4,the tube of fume extraction will recycle the gas flow which come from the inner stove during the carbonizing process for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking

ENVIRONMENT:

1,Totally No pollution ( there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again

2. We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.

Gas Flow Carbonization Stove/Furnace

Model Volume Capacity Working temperature in the stove QTL 2M3 0.8-1MT/stove, 2-3ton/24hours 420-1200 degree

P.S.: 1. three inner stoves to recycle         2. 0.8-1MT/stove             inside volume:1.8-2.0M3        3. Carbonizing time:6-8hours            Cooling type: Natural cooling or forced cooling            Cooling time:8-12(natural cooling)